zaniboni_com

AUTOMATIC MODEL SUITABLE TO MARK BEARINGS (Ideal to be inserted in existing production lines with loading/unloading cycles)

SVDM 100: bearing diameter from 25mm to 100mm
SVDM 150: bearing diameter from 30mm to 150mm
SVDM 200: bearing diameter from 50mm to 200mm

Output capacity: 1.200-1.500 pieces/hour.
Fixed marking station (a cylinder brings the piece under it).
Indelible marking without deformation of the piece.
Adjustable marking depth (max. 30 micron).
Characters height: from 0,8mm to 5mm.
Marking area: it depends on the marking head given in the equipment
Starting cycle by two twin buttons.
Input voltage: 400V/50Hz.
Consumption: about 1 Kwh.

BASE STRUCTURE

• Work bank fitted to contain all the components
• Enclosure on two sides and opening on the frontal and on the back side to allow inspection and maintenance
• Conveyor belt for the loading of the pieces.
• Horizontal cylinder for the transfer of the pieces from the conveyor belt to the marking head.
• Unloading of the pieces in a row.
• Automtic check of the marking process.